اثر WO3 و MnO2 بر ابر رساناهای دمای بالای Bi-2223 تهیه شده به روش سل - ژل

نویسندگان

پردیس دانشگاه فردوسی

چکیده

ابررسانای Bi1.7Pb0.3Sr1.97Ca2.03Cu3.1Oy به روش سل - ژل تهیه و اثر افزودن ذرات WO3 و MnO2 بر خواص آن بررسی شد. مطالعات ساختاری نشان می دهد که نمونه های نهایی دارای همگنی مناسب و بیشتر از فاز 2223 و با درصد کمتری از فاز 2212 تشکیل شده اند. مطالعه الگوهای پراش پرتو X نشان می دهد که نفوذ یونهای W6+ به درون فاز ابررسانا برای درصدهای وزنی بیش از 2 به طور چشمگیری افزایش می یابد. بعلاوه، یونهای W6+ نفوذی، ترجیحا جایگاههای شبکه ای 4e و 2a متعلق به یونهای Cu را اشغال می کنند. اندازه گیری های الکتریکی نشان می دهند که نمونه حاوی 1 درصد وزنی WO3 بهترین خواص ابررسانایی را دارد و برای درصدهای بالاتر، ابررسانایی تضعیف می شود. بهترین خواص ابررسانایی برای نمونه حاوی 0.5 درصد MnO2 در دمای تفجوشی 83۰oC مشاهده شد.

کلیدواژه‌ها


عنوان مقاله [English]

Influence of WO, and MnO, on tbe Bi-2223 bigb temperature superconducton, prepared by sol-gel tecbnique

چکیده [English]

The BiI.7Sbo.JSr..,.,cal.OlCuJ.IOy superconductors are prepared by
sol·gel method and the effect ofW~ and MnOz additives on their properties
are studied. Structural studies show that the find samples are homogeneous
and are mainly composed of 2223 and lower percents of 2212 phases.
Analysis ofthe X-ray diffraction patterns indicate that the penetration of~
ions into superconducting phase considerably increases for more than 2 wt%
additives. Also. the penetrating ~ ions preferentially occupy 4e and 2a
crystallographic sites of eu atoms. The electrical measurements show that
the best superconducting properties obtain for the sample with I wt% of
WOJ additive, while superconductivity is weakened for higher amounts of
WO,. For the sample with O.S wt% of MnOz additive, the best
superconducting properties are obtained after sintering at 830 OC.

کلیدواژه‌ها [English]

  • superconductivity. sol-gel. Bi(Pb)SrCaCuO. WOj. MnO]