Investigation of sensing properties of cobalt doped nickel-ferrite nanostructures synthesized by microwave method

Abstract

In this work, Cobalt doped Nickel Ferrite nanostructures (Ni1-xCoxFe2O4; (x = 0.0, 0.05, 0.15, 0.2, 0.3)  were synthesized by Microwave assisted combustion method and then the powder obtained was pressed to form disk shape sample with 2.5cm in diameter. The samples were annealed at 700°C for 4 h. Structure ,surface morphology and gas sensing properties of the samples were studied using X- ray diffraction (XRD), Filed Emission Scanning Electron Microscope (FESEM) and Gas Sensing Reactor (GSR). The XRD spectra of the samples indicate the formation of spinal phase. Sensors response at different temperatures were investigated for acetone gas (2500ppm) and the results indicate that the optimum work`s temperature for samples is about 300°C. The results showed that the as grown samples have the higher response compared to the annealed samples. The maximum response achieved in sample with %5 Cobalt doping.

Keywords


[1] Ya Tang, Xinwei Wang, Qinghong Zhang, YaogangLi, "HongzhiWang,Progress in Natural Science", Materials International22(1), (2012)53–58.

]2[ Chengxiang Wang, Longwei Yin, Luyuan Zhang, Dong Xiang and RuiGao, "Sensors10", (2010), 2088-2106.

]3[ Rezlescu N., Iftimie N., Rezlescu E., Doroftei C., Popa P.D., "Sensors and Actuators B 114", (2006), 427–432.

]4[ Gedam N. N., Kadu A. V., Padole P. R., Bodadeand A. B., Chaudhari G. N., Sensors & Transducers Journal,110 (2009) 86-95.

]5[ Kapse V.D., Ghosh S.A., Raghuwanshi F.C., Kapse S.D., "Materials Chemistry and Physics 113", (2009) 638–644.

]6[ Florin Tudorache, Paul DorinPopa, Marius Dobromir, Felicia Iacomi, Materials Science and Engineering B 178 (2013)1334-1338.

]7[ Rezlescu N., Rezlescu E., Tudorache F., Popa P. D., "Romanian Reports in Physics", 61(2009) 223–234.

]8[ Sutka A., Mezinskis G., Lusis A., Stingaciu M., Sensors and Actuators B, 171– 172 (2012) 354– 360.

]9[ Brittany L. Hayes, Aldrichimica ACTA, VOL. 37 (2004) NO. 2.

]10[ Sertkol M., Koseo˘glu Y., Baykal A., Kavas H., Bozkurt A., Toprak M.S., Journal of Alloys and Compounds 486 (2009) 325–329.

]11[ Wang C.C., Weng Yu.C., Chou T. C., Sensors and Actuators B122 (2007) 591–595.

]12 [Gedam N. N., Padole P. R., Rithe S. K., Chaudhari G. N., J Sol-Gel Sci. Techno.l50 (2009) 296–300.

[13] Kamble V.L. , Mathe. Sensors and Actuators B, 131, (2008) 205–209.

[14] Sonali L., Darshane S.S., MullaSuryavanshi I.S., Ceramics International 35 (2009) 1793–1797.

]15[ Hankare P.P., Sanadi K.R., Garadkar K.M., Patil D.R., Mulla I.S., Journal of Alloys and Compounds 553, (2013) 383–388.

[16] Shannon R.D., ActaCryst.A 32(1976) 751-767

[17] Amal M. Ibrahim, Abd El-Latif M.M., Morsi M. Mahmoud, Journal of Alloys and Compounds 506, (2010) 201–204.

]18[ Kambale R.C., Shaikh P.A., Kamble S.S., Kolekar Y.D., Journal of Alloys and Compounds 478, (2009) 599–603.

]19[ Ahmad Umar, Yoon- Bong Hahn, Metal Oxide Nanostructures and Their Applications, Volume 3, (2010) Pages 31-52.

]20[ JIAO Wan-li, ZHANG Lei, Trans. Nonferrous Met. Soc. China 22 (2012) 1127-1132.

]21 [Chengxiang Wang, Longwei Yin, Luyuan Zhang, Dong Xiang and RuiGao, Sensors10, (2010) 2088-2106.

]22[ Sutka A., Stingaciu M., Mezinskis G., Lusis A., J Mater. Sci. 47 (2012) 2856–2863.

]23[ Arafat M. M., Dinan B., Sheikh A. Akbar, Haseeb A. S. M. A., Sensors12 (2012) 7207-7258.